Digital Jacquard Machine for Weaving Scarf and Shawl

High rotating speed and low torque are more suitable for products of large, heavy design weaving. So the SEJ168S-1408 digital jacquard weaving machines are popular used to weave saree, scarves, shawls, stoles and terry towels. The videos in the gallery shows S&S SEJ168S-1408 Electronic Jacquard machines are working with rapier looms to weave scarves and stoles. Crank direct drive + chain drive, the main driving parts are all standard parts, the chain transmission efficiency is up to 96%, the enhanced self-lubricating chain bearing capacity and life is more than 5 times of the ordinary chain. It is obvious the SEJ168S series electronic jacquard looms are designed to work with high speed textile weaving machines. This model of jacquard weaving machines are compatible with high speed Rapier Loom , Air Jet Loom, water jet loom and shuttle loom. 

Applicable to：

Rapier loom, air jet loom, water jet loom, shuttle loom, Projectile Loom with any reed width.

Weaving Products:

Label, tie, scarf, shawls, stoles, upholstery fabric, curtain fabric, shading fabric, sofa cloth, bedding cloth, towel, carpet, velvet, garment fabric, sari fabric, silk fabric, lining fabric etc.

Hooks: 1408

Shed Opening: 55-120mm

Max Speed: 850 rpm

Advantageous Features：

1. The low power axial-flow fans ensure stable working condition to electronic system.

   Sealed fuselage, optimised filtration and ventilation system can effectively prevent flying flowers into the system.

2. Hollow type of core parts with light inertia, high speed and low torque are more suitable for making large and heavy design fabrics. 

3.  All main driving components of Digital Jacquard Machine are standard parts. The transmission efficiency of chain is as high as 96%. The bearing capacity and service life of enforced self-lubricating chain of Jacquard Weaving Loom is 5 times than that of ordinary chain. The casting wallboard has a good mechanical properly. It helps to decrease the vibration and reduce the noise.

4. The core hook components of the Jacquard Loom Machine use sealed and low-power consumption electromagnet.It saves energy and has high efficiency. All digital jacquard looms adopt high quality harness which have extreme wear-resistance and corrosion resistance. There are two types of pulley you could choose to use in the hook component. One is Pulley With Bearing, another is Pulley Without Bearing. The bearing capacity of pulley with bearing is better and it is more suitable for high speed weaving.

5. The maintenance of  the electronic jacquard weaving loom is very easy because it has the most concise shedding mechanism and    the fewest parts. The maintenance cost is also much lowered.

Size Parameter：